Network, set up port forwarding as described in the router manual fromĪn incoming UDP port (e.g. In order to be able to wake up a certain computer in the local Set up port forwarding to a certain computer Depending on the router used, only some of the followingĪlternative configuration possibilities may be supported. Wake-on-LAN via a router's public address requires port forwarding toīe set up. Types of devices support the necessary configuration. Configuring the routerĭepends on the device used and the firmware installed on it.
If you have chosen the option TeamViewer IDs within The router only needs to be configured if you have chosen the PublicĪddress option.
The computer can now be wakened via its public address and TeamViewer. In the Port field, enter the UDP port via which the computer can be reached (Default UDP port is 9). In the Address field, enter the fixed IP address or DNS name of the computer. 
Click the Public address option button. Under Network settings | Wake-on-LAN, click the Configure…button. The computer can now be wakened via the saved TeamViewer ID. Wake up is to be sent and then click the Add… button. In the TeamViewer ID field, enter the TeamViewer ID in your network via which the signal to. Click the TeamViewer IDs within your network option button. Under Network settings | Wake-on-LAN, click the Configure… button. The TeamViewer options dialog box will open. Click Extras | Options in the main menu. 
The computer is in one of the following power states. The computer is connected to the Internet via a network cable. The computer has an Internet connection. The computer's network card supports Wake-on-LAN. The computer is connected to a power source. See the manual on how to do it here Tutorial Essentials If the computer logs in automatically and if Teamviewer is added to the AutoStartup list, then it should work like you would like. You could use "Wake On Lan" to wake up your computer over the Internet.
0 kommentar(er)
